플라스틱 열분해 전문 블로그

EcoCreation Co.,Ltd.  Pyrolysis machine  model name : ECP-2011 Daily Capacity : 1~150ton/day (custom made)_ Batch type Heat  Fuel : Gas burner 100nm3/d approx Power consumption : 10kw/h Cooling water tank : 30m3 approx.  Emergency Over pressure prevent tank  : over 1.5 bar, automatically open.  Yield :  60~95% Operate time : 8~10 hours based on mixed plastics ( single material can save 2 hours) Input Materials : pp,pe,ps,abs or mixed plastics Output product : Naptha(15%), Disel fractions (80%) others (5%) Reactor type : Rotary Kiln ( Semi open door) Inquiry for cost : eco@ecocreation-in.com

Pyrolysis machine made by Korea Company.  We EcoCreation have developed pyrolysis process for over 17years.  This machine is convert waste plastic PP,PE,PS,ABS or Mixed Plastics to Disel & Kerosene fractions.  We use Catalyst to reform the hydrogen carbon chains then make its to 5~20 numbers.  It helps us to remove Bunker C oil or residues like cheap oil.  Though this process, we remove wax and sulphur perfectly and use these oil at disel generators.  To improve a centan point number, we mix an improver by 1/1000 ratio in oil.  And some of ocean waste customer asked about remove a sulphur.  Ocean waste exposed to UV, Hydrogen Chroline , Oxidity etc.  We should these materials to prevent steel corrosion.  If you need more information, please send us Email.  eco@ecocreation-in.com Thank you.

Here's our installation in Russia.  We Eco-Creation manufacture pyrolysis machine based on chemical + Engineering area.  Pyrolysis problems are Wax, Sulphur in oil. We remove these through our development  ' 'Ceramic Catalyst' which helps for oil quality.  If you need more details, please visit our website wrote on below. 

We Eco-Creation Co.,Ltd manufacture pyrolysis machine which based on Chemistry and Engineering. By removing wax, sulphur with foreign matters, we abstract only pure oil to use at disel engine or generators. IF you see more details please visit our webste wrote on below bar. and about inquiry, please send us Email to here : eco@ecocreation-in.com

Pyrolysis ... We Eco-Creation company have developed pyrolysis area based on chemistry.  We focused on oil quality to use afterwards, so we should remove wax, sulphur, foreign matters.  In process, Plastic converted to oil with paraffin wax which stuck to machine pipes.  If the wax getting stuck to pipes, pipes will be blocked then exploded  in the end. Customer who don't know well this technology only focus on machine cost.  This is very hazardous thinking. For examples when we visit one pryolysis factory where operating a chiness machine, We were very surprised seeing that operator didn't even know how the machine fulled by pressure inside. It looked supposed to exploded soon, but they didn't even know the problems.  It because paraffin wax almost blocked inside of pipes, and workers didn't clean up the blocked pipes often. But ,actually it's hard to be because of disjointing all the pipes.  It's quite took long ...